Xiaomi Redmi 3S Flash File: On this page, you will find the link to download Xiaomi Redmi 3S Firmware Flash Tool on your PC/Laptop. The Firmware file you will get is gonna be in the zip file mode and you will get Xiaomi Redmi 3S Flash File, Xiaomi Redmi 3S Flash Tool, Xiaomi Redmi 3S USB Drivers and a manual on How to flash Xiaomi Redmi 3S. So, below is a download file for all your needs.
Download Xiaomi Redmi 3S Flash File (Firmware Stock ROM):
- http://bigota.d.miui.com/V10.1.1.0.MALMIFI/miui_HM3SGlobal_V10.1.1.0.MALMIFI_8c9c91a10c_6.0.zip – RECOVERY ROM
- http://bigota.d.miui.com/V10.1.1.0.MALMIFI/land_global_images_V10.1.1.0.MALMIFI_20181124.0000.00_6.0_global_c00edf0205.tgz – FASTBOOT ROM
- Xiaomi Flash tool
Below is a video Tutorial on Xiaomi Redmi 3S:
How to Flash Xiaomi Redmi 3S:
To Download Flash Files for Xiaomi Redmi 3S, you have to follow the procedure below.
- Connect Xiaomi mobile (Redmi 3S) through the USB cable to PC and unplug the battery.
- Short Test Point and connect the battery.
- Under Device Manager, the port of Qualcomm HS USB QLoader 9008 port will appear.
- Download & run MI Flash Tool on your Xiaomi 5A.
- Place the Flash File on PC/Laptop.
- Now, Assign the Folder path.
- Click on the refresh button & then tap the Flash button.
About Xiaomi Redmi 3S:
The front panel of the Redmi 3S Prime is almost the same as the Xiaomi Redmi Note 3, but the sensors are present above the display. You will find capacitive home, back and recent buttons. These are present below the display. The sensor and front camera are on either side of the earpiece. To a large extent, this phone looks inspired by Xiaomi Mi Max, which is equipped with a 6.44 inch display. However, the Redmi 3S Prime has a thickness of 8.5 millimeters while the Premium Mi Max comes with a thickness of 7.55 mm.
It has an infrared emitter and 3.5mm audio jack at the top. The bottom has a standard micro-USB port and a microphone. Redmi 3S Prime is a metal body phone. It gives a sense of being premium in its price. It weighs 144 grams. This is more weight for a budget device. But due to the curved edge it is easy to hold. The reason for the high weight is the large battery present in the smartphone.
The Octa-core Qualcomm Snapdragon 430 processor has been used in Redmi 3S and Redmi 3S Prime. Four cores provide clock speeds of 1.1 GHz and the remaining four cores of 1.4 GHz. The Adreno 505 GPU is integrated for graphics. Apart from the fingerprint sensor, the difference between Xiaomi Redmi 3S and Redmi 3S Prime is storage and RAM. The Redmi 3S handset comes with 2GB of RAM and 16GB of inbuilt storage. At the same time, Redmi 3S Prime has 3 GB RAM and inbuilt storage is 32 GB.
In terms of connectivity, Redmi 3S Prime (Redmi 3S) features Voice over LTE, 4G, Wi-Fi 802.11 b / g / n, Bluetooth, GPS / A-GPS, GLONASS and Micro-USB features. The Redmi 3S Prime supports all LTE bands being used in India. Xiaomi has said that when using two SIM cards simultaneously in the handset, the primary SIM card will support 4G and the second SIM will only support 3G.
Redmi 3S Prime’s 4100 mAh battery is another notable feature. It has a 13-megapixel rear camera equipped with phase detection autofocus, F / 2.0 aperture, HDR mode, 1080 pixels video recording and LED flash. You will get a 5 megapixel front camera. It is also possible to record videos of 1080 pixel resolution.
If you are interested in knowing how to take a screenshot in your phone,do read our article on taking a screenshot using Redmi 3S.